-
Lamp Pumped Nd: YAG Laser Marking System: ATL
Lamp Pumped Nd: YAG laser marking is conventional and proven for the most industrial laser and marking application worldwide. Till date Lamp Pumped YAG laser enjoys large numbers of installation all over the world. In this type of system, lamp is used to pump crystal rod. This machine is rugged and good for harsh shop floor condition. Lamp pumped laser is also ideal for application that demands high power like deep marking or engraving. Lamp pumped laser system draws more power and generate most heat, but relatively inexpensive in terms of initial investment. Lamp pumped system require consumables like lamp and water filter etc. Lamps may have to be changed approximately every 600-800 hrs if operated continuously at high operating levels or 1000-1200 hrs for less demanding operation. However, annual maintenance cost is higher due to change of lamp, flow tube, DI filter, etc.
Features: • Proven & oldest laser technology for marking • Lower initial investment per unit of laser power (watt) generated. • Preferred choice for deep marking or engraving • Fairly robust and rugged • Easy availability of spares and service in the market
Technical Specification:
-
|
Laser Type
|
Nd: YAG Lamp
|
|
Pumping Method
|
Lamp Pumped
|
|
Average /CW Output Power
|
75 W
|
|
Wavelength
|
1064 nm
|
|
Beam Quality
|
M2 < 5
|
|
Pulse Width
|
< 200 ns
|
|
Pulse Repetition Rate /Frequency
|
1-50 kHz
|
|
Peak Power
|
Upto 50 kW
|
|
Red Aiming Beam / Guide Laser
|
Yes
|
|
Laser Class
|
IV
|
|
Ambient Temperature
|
25 °C
|
|
Electrical Connection
|
380 V / 50 Hz ;
Three Phase: 60 Hz
|
|
Power Consumption
|
< 11 kW
|
|
Marking Area
|
Option: A - 100 x 100 mm
Option: B – 150 x 150 mm
|
|
Working Area
|
Option: A – 200 x 200 mm
Option: B – 400 x 250 mm
Option: C – 500 x 500 mm
|
|
Z-Axis Travel / Max. Work Piece Height
|
Option: A – 100 mm
Option: B – 200 mm
Option: C – 300 mm
|
|
Z-Axis Motion Type
|
Motorized / Manual
|
|
Software Features
|
-
Window 2007 / XP Compatible
-
Single Screen Highly User Friendly Graphic User Interface(GUI)
-
*.plt, *.jpeg, *.bmp, *.dxf compatible
-
Serial Number, Barcode, 2D Matrix Code Marking
-
Auto Marking Activation with delay according to work study
-
Multiple Object Preview/ Single Object Preview
-
RS 232 / Automation Compatible
|
|
